KCB gear pump manufacturer

KCB gear pump for conveying without solid particles and fibers, non-corrosive, temperature not higher than 80 ° C, the viscosity of 5 × 10-6 to 1.5 × 10-3m2 / s (5-1500cSt) the lubricants or nature ofsimilar to the other liquid of the lubricating oil.
Applications
Oil can be used as a transmission system, booster pumps;
In the fuel system can be used as conveying, pressurizing, ejecting the fuel pump;
In all industrial fields, may be useful as a lubricating oil pump.
Structural features
KCB gear pump this series gear pump is mainly composed of gears, shafts, pump, safety valve, shaft end seal. Gear after the heat treatment has a high hardness and strength, together with the shaft mounted within replaceable bushings operation. All parts of the lubrication pump when the pump output media automatically reach.
KCB series gear pump, pump design drain and back to the sump to withstand the torque of the gear in the work force minimum bearing load, wear, high efficiency pump.
The pump is provided with the safety valve as an overload protection, the full return pressure of the safety valve for the pump rated negative pressure of 1.5 times, can also be allowed in the discharge pressure in the range according to the actual need for additional adjustment. But pay attention to the safety valve can not be long-term work of the pressure reducing valve, when required separately in the pipeline installation. Outside stretch from the spindle end to the pump clockwise rotation.